/
Enabling / Disabling to D/A Convert (Address "0")
Enabling / Disabling to D/A Convert (Address "0")
Buffer Memory Address "0"
This is used to set up whether enabling or disabling to D/A-convert by the channels.
To make it available to set up enabling/disabling to D/A-convert, requesting to set up operation condition (Y0A) is to be set and reset.
Default value is set up as disabling D/A conversion.
As a set value is stored in EEPROM, the A/D module is operated as previously set value even though the power is on and off.
, multiple selections available,
Related content
Enabling / Disabling to A/D Convert (Address "0")
Enabling / Disabling to A/D Convert (Address "0")
More like this
Enabling/Disabling to RTD-Convert ("0")
Enabling/Disabling to RTD-Convert ("0")
More like this
Digital Output Setup Mode (Address "24, 25")
Digital Output Setup Mode (Address "24, 25")
More like this
A/D Converted (Address "10")
A/D Converted (Address "10")
More like this
Range of Input Setup (Address "20, 21")
Range of Input Setup (Address "20, 21")
More like this
Enabling / Disabling D/A Output (Address "23")
Enabling / Disabling D/A Output (Address "23")
More like this