Enabling/Disabling to RTD-Convert ("0")

Buffer Memory Address "0"

This is used to set up whether enabling or disabling to RTD-convert by the channels.

To make it available to set up enabling/disabling to RTD-convert, requesting to set up operation condition (Y02) is to be set and reset.

Disabling to RTD-convert is set up as default value.

As a set value is stored in EEPROM, a RTD module is operated as previously set value even though power is on and off.

Open

[Ex. ] In case that the channels for A/D conversion are 2,4, 00AAH(170) is to be written to Buffer Memory Address "0" and requesting to set up operation condition (Y02) is to be set and reset.

Open