A/D Converted (Address "10")

Buffer Memory Address "10"

If an assigned channel is A/D-converted first, the memory for A/D-converted will be set. And, flag indicating A/D-converted (X02) will be set if all channels are A/D-converted first
If requesting to set up operation condition (Y03) is on, the memory will be reset. And if a corresponding channel is A/D-converted, the memory will be set.
In case of 4-channel module, the data from b4 to b7(CH5 ~ CH8) are disregarded.

1 : A/D Converted / 0 : A/D Converting or not use

Open

The data from b4 of AD04VI and the data from b8 to b15 of AD08I and AD08V are fixed as "0".

Example :
When Channel 1,2 and 6 are enabled to A/D-convert and all the channels A/D-convert, 0023H(35) is stored in Buffer Memory Address 0 as follows.

Open