Internal I/O Table - D/A Converters
- CIMON (Unlicensed)
Signal Direction (CPU <-D/A Module) | Signal Direction (CPU ->D/A Module) | ||
Input | Signal Name | Output | Signal Name |
X00 | D/A module ready | Y00 | Not use |
X01 | Not use | Y01 | |
X02 | Y02 | ||
X03 | Y03 | ||
X04 | Y04 | ||
X05 | Y05 | ||
X06 | Y06 | ||
X07 | Y07 | ||
X08 | Y08 | ||
X09 | Y09 | ||
X0A | Flag indicating operation condition set up | Y0A | Requesting to set up operation condition |
X0B | Flag indicating the channel switched | Y0B | Requesting to switch an channel |
X0C | Flag indicating the set value modified | Y0C | Requesting to modify an set value |
X0D | Flag indicating offset or gain calibration mode | Y0D | Requesting to calibrate offset or gain |
X0E | Not use | Y0E | Assigning offset or gain calibration mode |
X0F | Flag indicating an error in D/A module | Y0F | Requesting to clear an error |
The numbers of I/O signal are the ones of the case that a D/A module is mounted on Slot 0 of a local base.