Buffer Memory
- CIMON (Unlicensed)
Address | Description | Default value | R/W | |
Hexa | Deci | |||
0H | 0 | Enabling/disabling to D/A convert setup | 0 | R/W |
1H | 1 | Digital value of CH.1 | 0 | R/W |
2H | 2 | Digital value of CH.2 | 0 | R/W |
3H | 3 | Digital value of CH.3 | 0 | R/W |
4H | 4 | Digital value of CH.4 | 0 | R/W |
5H | 5 | Digital value of CH.5 | 0 | R/W |
6H | 6 | Digital value of CH.6 | 0 | R/W |
7H | 7 | Digital value of CH.7 | 0 | R/W |
8H | 8 | Digital value of CH.8 | 0 | R/W |
9H | 9 | Error code | 0 | R |
AH | 10 | Hold/Clear | 0 | R/W |
BH | 11 | Set value check code of CH1 | 0 | R |
CH | 12 | Set value check code of CH2 | 0 | R |
DH | 13 | Set value check code of CH3 | 0 | R |
EH | 14 | Set value check code of CH4 | 0 | R |
FH | 15 | Set value check code of CH5 | 0 | R |
10H | 16 | Set value check code of CH6 | 0 | R |
11H | 17 | Set value check code of CH7 | 0 | R |
12H | 18 | Set value check code of CH8 | 0 | R |
13H | 19 | Channel to calibrate offset | 0 | R/W |
14H | 20 | Channel to calibrate gain | 0 | R/W |
15H | 21 | Calibrated offset value and gain value | 0 | R/W |
16H | 22 | Setting up digital input type | 0 | R/W |
17H | 23 | Enabling / Disabling D/A output setup | 0 | R/W |
The channels from 5 to 8 are not used for a 4-channel module.
The type of every data is word.
R/W indicates whether reading/writing from a PLC is enabled. (R : Reading is enabled / W : Writing is enabled)