Error Codes (Address "9")
- CIMON (Unlicensed)
Buffer Memory Address "9"
The error codes detected from a D/A module are stored in these addresses.
is from 1 to 4 for DA04I, DA04V and DA04VA and from 1 to 8 for DA08I, DA08V and DA08VA(The number means the channel.) 
If an error occurs, it will be kept till it is cleared or the power is off. If an error is not cleared after it occurs, a newly occurring error will be disregarded
Error code | Description |
1 | The case that a set digital input value is out of maximum range (16191, 8191) |
2 | The case that a set digital input value is out of minimum range (-192, -8192) |
40 | The case that an offset value is greater than a gain value |
41 | The case that both an offset and an gain are calibrated or two channels are set up at the same time |
42 | The case that a calibrated digital value is out of range when offset/gain is calibrated |
10 | Error in system (A/S required) |
