MUX Module

Owned by CIMON (Unlicensed)
Mar 29, 2024
2 min read

In order to read analog value from other sensors, it is used to set analog input value to assigned channels.

Click Online -> Special Module Setup and AD MUX Module or Analog MUX module on the Card Properties.

Applied Module : CM3-SP04EAM

AD MUX Module Setup

 

image-20240329-083458.png

 

Base and Slot number will appear automatically if CICON connects to PLC.

  1. Click Channel 1. (If you want to set all 4 channels at once, press Ctrl and click channels)

  2. Click Enable and choose Relay ON Time.

    image-20240329-083515.png

  3. Click OK.

  4. Click Write to save parameter to PLC.

  5. Click to Read to check parameter.

  6. If you click Counter Reset, the selected channel will be reset.

  7. If you want to change Auto Mode to Manual Mode, click Auto Mode.

Click Yes, then Manual Mode appears.