High Speed Counter Module

It is used to set parameter of HSC channels.

Click Online -> Special Module Setup and High Speed Counter Module or click High Speed Counter module on the Card Properties.

Applied Module : CM1-HS02C, CM1-HS02E, CM1-HS02F

Channel Setting

Example) Counter mode : Linear with 1 Phase and 1Multiple

Open

Base and Slot number will appear automatically if CICON connects to PLC.

From the Counter Mode full-down menu, choose Linear Counter
Type value each Preset, Comparison 1 and Comparison 2. If Preset buffer memory is ON, preset value will become current value.
Counter Type : choose Not Count. Only if Counter Enable and Counter Start are turned ON , Counter will get started.
Click Write to save the parameters.
Click Status to check status of each channels.

Open