POS

Forced to change the current position address to a new address. The new address has to be designated in the ‘target address’ field.

For instance,
Configure the control code as ‘POS’ and specify the target address as '4000.' When this command is executed, the current coordinate will be set as '4000.'

Position Data No.	Control Pattern	Interpolation	Acceleration Time	Deceleration Time	Control Code	Dwell Time	Operation Speed	Target Address
1	Single Step	Non-Interpolation	No. 1	No. 1	POS	0	1,000	4,000

PLC Manual

POS

Related content