High Alarm set Value (Address "113"-"128")
- CIMON (Unlicensed)
High Alarm Set Value (Address "113"-"128")
Address | Function | R/W | |
Hex | Dec | ||
71H | 113 | CH.1 High Alarm Set Value | R/W |
72H | 114 | CH.2 High Alarm Set Value | R/W |
73H | 115 | CH.3 High Alarm Set Value | R/W |
74H | 116 | CH.4 High Alarm Set Value | R/W |
75H | 117 | CH.5 High Alarm Set Value | R/W |
76H | 118 | CH.6 High Alarm Set Value | R/W |
77H | 119 | CH.7 High Alarm Set Value | R/W |
78H | 120 | CH.8 High Alarm Set Value | R/W |
79H | 121 | CH.9 High Alarm Set Value | R/W |
7AH | 122 | CH.10 High Alarm Set Value | R/W |
7BH | 123 | CH.11 High Alarm Set Value | R/W |
7CH | 124 | CH.12 High Alarm Set Value | R/W |
7DH | 125 | CH.13 High Alarm Set Value | R/W |
7EH | 126 | CH.14 High Alarm Set Value | R/W |
7FH | 127 | CH.15 High Alarm Set Value | R/W |
80H | 128 | CH.16 High Alarm Set Value | R/W |
In case of 8-channel module, address 121~128 are not used.
To use High Alarm by comparing A/D conversion value, the High Alarm Value is assigned based on the Present Value (Offset 11~18).
If the converted value exceeds the High Alarm Value, the corresponding contact and buffer is set to "Alert"
Configurable range is as shown below.
Output Format | Range | |
Unsigned Value | 0 ~ 16,000 | |
Signed Value | -8,000 ~ 8,000 | |
Regular Value | 4 ~ 20 mA | 4,000 ~ 20,000 |
0 ~ 20 mA | 0 ~ 20,000 | |
1 ~ 5 V | 1,000 ~ 5,000 | |
0 ~ 5 V | 0 ~ 5,000 | |
-10 ~ 10 V | -10,000 ~ 10,000 | |
0 ~ 10 V | 0 ~ 10,000 | |
Percentage | 0 ~ 10,000 | |
To disable High/Low Alarm Value feature, set both bound values to "0".