Low Alarm Set Value (Address "129"-"144")

Address		Function	R/W
Hex	Dec	Function	R/W
81H	129	CH.1 Low Alarm Set Value	R/W
82H	130	CH.2 Low Alarm Set Value	R/W
83H	131	CH.3 Low Alarm Set Value	R/W
84H	132	CH.4 Low Alarm Set Value	R/W
85H	133	CH.5 Low Alarm Set Value	R/W
86H	134	CH.6 Low Alarm Set Value	R/W
87H	135	CH.7 Low Alarm Set Value	R/W
88H	136	CH.8 Low Alarm Set Value	R/W
89H	137	CH.9 Low Alarm Set Value	R/W
8AH	138	CH.10 Low Alarm Set Value	R/W
8BH	139	CH.11 Low Alarm Set Value	R/W
8CH	140	CH.12 Low Alarm Set Value	R/W
8DH	141	CH.13 Low Alarm Set Value	R/W
8EH	142	CH.14 Low Alarm Set Value	R/W
8FH	143	CH.15 Low Alarm Set Value	R/W
90H	144	CH.16 Low Alarm Set Value	R/W

In case of 8-channel module, address 137~144 are not used.

To use Low Alarm by comparing A/D conversion value, the Low Alarm Value is assigned based on the Present Value (Offset 11~18).
If the converted value exceeds the Low Alarm Value, the corresponding contact and buffer is set to "Alert"

Configurable range is as shown below.

Output Format		Range
Unsigned Value		0 ~ 16,000
Signed Value		-8,000 ~ 8,000
Regular Value	4 ~ 20 mA	4,000 ~ 20,000
	0 ~ 20 mA	0 ~ 20,000
	1 ~ 5 V	1,000 ~ 5,000
	0 ~ 5 V	0 ~ 5,000
	-10 ~ 10 V	-10,000 ~ 10,000
	0 ~ 10 V	0 ~ 10,000
Percentage		0 ~ 10,000

To disable High/Low Alarm Value feature, set both bound values to "0".