Offset/Gain Calibration Mode (Address "22, 23")

Buffer Memory Address "22", "23"

These are used to assign the channel of which offset/gain are calibrated.
The channel to calibrate an offset is assigned to Buffer Memory Address "22" and the channel to calibrate an gain is assigned to Buffer Memory Address "23".
It is available to set up two channels at the same time. But, an offset and a gain is to be calibrated each. (One of Buffer Memory Address "22" and "23" should be set up as "0".) If both are set up at the same time, an error(Error code "49") occurs in offset/gain calibration mode.
In case of a 4-channel module, the data from b4 to b7(For channels from 5 to 8) are disregarded.