Assigning Average Process (Address "9")

Buffer Memory Address "9"

Use the CICON to select sampling process or average process, and to write a set value to Buffer Memory "9"
To make the setup available, requesting to set up operation condition (Y02) is to be set and reset.
In case that average process is selected, use the CICON to select average time or number of times.
Default value is set up as the sampling process and averaging number of times for all channels.
As a set value is stored in EEPROM, the A/D module is operated as previously set value even though the power is on and off.

Open

Assigning the channels for average process
1 : Average Process
0 : Sampling Process
Assigning time and number of times
1 : Averaging Time
0 : Averaging Number of Times

Example :
In case that Channel 1 and 5 are assigned to averaging number of times, Channel 2 and 7 to averaging time and the rest to the sampling process, requesting to set up operation condition(Y02) is set and reset after 5342H(21314) is stored in Buffer Memory Address "9".

Open