/
Unit Time
Unit Time
Unit Time (Offset 14)
Unit time must be set in order to use and measure RPM or PPS. If unit time is set as zero (0), RPM and PPS measurement function will not operate. By measuring the pulse count number for a specified period of time and based on the configured values, then the measured pulse count number will be written to the "Input Pulse per Unit Time" (Offset 23, 24) areas. The measured value will be updated in the Unit Time interval.
, multiple selections available,
Related content
Pulse Per 1 Cycle/Rotation
Pulse Per 1 Cycle/Rotation
More like this
RPM/PPS Measured Value
RPM/PPS Measured Value
More like this
Input Pulse Count Per Unit Time
Input Pulse Count Per Unit Time
More like this
An Example of Monitoring the value of PPS in RPM unit
An Example of Monitoring the value of PPS in RPM unit
More like this
Input Pulse Per Unit Time
Input Pulse Per Unit Time
More like this
High Speed Counter Example
High Speed Counter Example
More like this