/
External Preset Value
External Preset Value
External Preset Value (Offset 5, 6)
When external preset input signal (Channel 1: X0004, Channel 2: X0006) is changed (Contact A) from OFF to ON, the current count value is changed to designated value in this offset.
But, in the Ring Counter Mode, if the specified value is out of the count range, the current value will not be modified despite the preset signal input (Error Code 100 occurs).
, multiple selections available,
Related content
Internal Preset Value
Internal Preset Value
More like this
Preset Function
Preset Function
More like this
Ring Counter Maximum Value
Ring Counter Maximum Value
More like this
Operation Setting Command
Operation Setting Command
More like this
Presetting
Presetting
More like this
Presetting - PLCS HSC
Presetting - PLCS HSC
More like this