Digital Output Setup ("29") - TC Module

Buffer Memory Address "29"

This is used to select whether the range of digital output values is from 0 to 16000 or from –8000 to 8000.

If 0 is set, the range is from 0 to 16000. If 1, it is from –8000 to 8000.

To make the digital output setup available, requesting to set up an operation condition(Y02) is to be set and reset.

Default value is set up as the range from 0 to 16000.

As a set value is stored in EEPROM, a TC module is operated as previously set value even though power is on and off.