Input Signals - TC Module
- CIMON (Unlicensed)
NO. | Name of Signal | Description |
X00 | TC module Ready | · If power is inputted to a CPU or a CPU is reset, TC conversion will be ready. At this time, this signal is set and TC conversion is processed. |
X01 | Flag indicating TC-converted | · If all enabled channels convert, this signal will be set.. |
X02 | Flag indicating operation condition set up | · This is used as the interlock condition to set/reset request to set up operation condition(Y02) when enabling/disabling to TC-convert is switched. · When this signal(X02) is reset, TC conversion is not processed. In the following case, flag indicating operation condition set up will be reset. When requesting to set up operation condition is set.  |
X0F | Flag indicating an error in TC module | · If an error occurs in writing to buffer memory, this flag will be set. · To clear error code, request to clear the error(Y0F) is be set.  |