Buffer Memory Address ("41-58") - TC Module

Maximum Temperature Input Values(Buffer Memory Address "41"~"48")
Max./Min. temperature setup data(Buffer Memory Address "49")
Error in max./min. setup(Buffer Memory Address "50")
Minimum temperature input value(Buffer Memory Address "51"~"58")

This is used to input the max. value and min. value of desired temperatures.

To make the max. value or min. value setup available, the bits corresponding to the temperature setup data(Address 49) of a set channel is to be set and requesting to set up an operation condition(Y02) be set and reset.

The error in max./min. setup is to enter the bits of the corresponding channel if an input minimum value is greater than an input maximum value.

Initial values are set up as the max. value and the min. value of the rated measured range.

The max. value and the min. value changed by users are not stored in EEPROM. If you turn off and on power, they will be the initial values(Refer to "Detected Temperature Values oC"). To use an input maximum value and an input minimum value, it is necessary to program then directly.