Interpolation Area

Owned by CIMON (Unlicensed)
Mar 25, 2024
1 min read

Set the axes that is interpolated with current axes. Current axes treated as main axes. This setting is valid only when interpolation instruction is used. If the instruction is non-interpolation type, this setting has no meaning. But when the interpolation instruction is used, this setting must designate the sub axes.

Not Interpolation (00) : Use this setting on non-interpolated control.

X (01) : Use this setting when the Y axis is the main axis and the X axis is sub-axis.

Y (10) : Use this setting when the Y axis is the main axis and the X axis is sub-axis.