/
Set Coincidence Comparison Value 1 & 2
Set Coincidence Comparison Value 1 & 2
Buffer Memory (ch1: 12H~15H / ch2: 32H~35H)
This is used to store a set value, which is compared with the current value for coincidence output.
Two coincidence output values can be set up by channels.
The range is from -2147483648 to 2147483637(Signed 32-bit).
To make a set value available, DPRAM REQ(Y03,Y0B) of the I/O devices are to be on and off.
As a set value is stored in EEPROM, the HSC module is operated as previously set value even though the power is on and off.
, multiple selections available,
Related content
Set Coincidence Comparison Value 1 & 2 - PLCS HSC
Set Coincidence Comparison Value 1 & 2 - PLCS HSC
More like this
Preset Value
Preset Value
More like this
Coincidence Output - PLCS HSC
Coincidence Output - PLCS HSC
More like this
Preset Value - PLCS HSC
Preset Value - PLCS HSC
More like this
Counting Function Setup
Counting Function Setup
More like this
Set Lowest Limit Value and Upper Limit Value of Ring Counting
Set Lowest Limit Value and Upper Limit Value of Ring Counting
More like this