Counting Mode

Owned by CIMON (Unlicensed)
Mar 25, 2024
1 min read

Buffer Memory (ch1: 1CH / ch2: 3CH)

This is used to set up whether linear counting or ring counting is operated.
To make a set value available, DPRAM REQ(Y03,Y0B) of the I/O devices are to be on and off.
Refer to Chapter 6 for the details.

Mode of Counting

Buffer Memory Data

Linear Counting

0

Ring Counting

1

 

As a set value is stored in EEPROM, the HSC module is operated as previously set value even though the power is on and off.