/
Pulse Input Method
Pulse Input Method
Buffer Memory (ch1: 1DH / ch2: 3DH)
This is used to select the method to input the pulses counted.
To make a set value available, DPRAM REQ(Y03,Y0B) of the I/O devices are to be on and off.
Refer to Chapter 6 for the details.
Input Method | Operation Mode(Buffer memory Data) |
1-phase 1-multiple(Phase B H/W Input) | 0 |
1-phase 1-multiple (Phase B S/W Input) | 1 |
1-phase 2-multiple (Phase B H/W Input) | 2 |
1-phase 2-multiple (Phase B S/W Input) | 3 |
CW/CCW | 4 |
2-phase 1-multiple | 5 |
2-phase 2-multiple | 6 |
2-phase 4-multiple | 7 |
As a set value is stored in EEPROM, the HSC module is operated as previously set value even though the power is on and off.
, multiple selections available,
Related content
Pulse Input Method - PLCS HSC
Pulse Input Method - PLCS HSC
More like this
Sampling / Periodic Time
Sampling / Periodic Time
More like this
Counting Function Setup
Counting Function Setup
More like this
Counting Mode
Counting Mode
More like this
Counting Function Setup - PLCS HSC
Counting Function Setup - PLCS HSC
More like this
Subtract Command by software - PLCS HSC
Subtract Command by software - PLCS HSC
More like this