/
Preset Value
Preset Value
Buffer Memory (ch1: 10H, 11H / ch2: 30H, 31H)
This is used to store the preset value for counting.
The range is from -2147483648 to 2147483637(Signed 32-bit).
To make the set value available, DPRAM REQ(Y03,Y0B) of I/O devices are to be on and off.
As a set value is stored in EEPROM, the HSC module is operated as previously set value even though the power is on and off.
, multiple selections available,
Related content
Preset Value - PLCS HSC
Preset Value - PLCS HSC
More like this
Counting Function Setup
Counting Function Setup
More like this
Counting Mode
Counting Mode
More like this
Set Lowest Limit Value and Upper Limit Value of Ring Counting
Set Lowest Limit Value and Upper Limit Value of Ring Counting
More like this
Counting Function Setup - PLCS HSC
Counting Function Setup - PLCS HSC
More like this
Counting Mode - PLCS HSC
Counting Mode - PLCS HSC
More like this