/
Set Coincidence Comparison Value 1 & 2 - PLCS HSC
Set Coincidence Comparison Value 1 & 2 - PLCS HSC
Buffer Memory (ch1: 12H~15H / ch2: 32H~35H)
This is used to store a set value, which is compared with the current value for coincidence output.
Two coincidence output values can be set up by channels.
The range is from -2147483648 to 2147483637(Signed 32-bit).
To make a set value available, DPRAM REQ(Y03,Y0B) of the I/O devices are to be on and off.
As a set value is stored in EEPROM, the HSC module is operated as previously set value even though the power is on and off.
, multiple selections available,
Related content
Set Coincidence Comparison Value 1 & 2
Set Coincidence Comparison Value 1 & 2
More like this
Preset Value - PLCS HSC
Preset Value - PLCS HSC
More like this
Coincidence Output - PLCS HSC
Coincidence Output - PLCS HSC
More like this
Preset Value
Preset Value
More like this
Internal I/O - PLCS HSC
Internal I/O - PLCS HSC
More like this
Output Signals - PLCS HSC
Output Signals - PLCS HSC
More like this