/
Counting Mode - PLCS HSC
Counting Mode - PLCS HSC
Buffer Memory (ch1: 1CH / ch2: 3CH)
This is used to set up whether linear counting or ring counting is operated.
To make a set value available, DPRAM REQ(Y03,Y0B) of the I/O devices are to be on and off.
Refer to Chapter 6 for the details.
Mode of Counting | Buffer Memory Data |
Linear Counting | 0 |
Ring Counting | 1 |
As a set value is stored in EEPROM, the HSC module is operated as previously set value even though the power is on and off.
, multiple selections available,
Related content
Counting Function Setup - PLCS HSC
Counting Function Setup - PLCS HSC
More like this
Counting Mode
Counting Mode
More like this
Counting Function Setup
Counting Function Setup
More like this
Preset Value - PLCS HSC
Preset Value - PLCS HSC
More like this
Set Lowest Limit Value and Upper Limit Value of Ring Counting - PLCS HSC
Set Lowest Limit Value and Upper Limit Value of Ring Counting - PLCS HSC
More like this
Preset Value
Preset Value
More like this