Installing

Owned by CIMON (Unlicensed)
Mar 25, 2024
1 min read

Installation Environment

Conditions

  • Install in a waterproof and dustproof control panel.

  • Install at the place without continuous shock or vibration.

  • Keep out of the direct rays of the sun.

  • No dew caused by sudden temperature variation.

  • Keep ambient temperature from 0 to 55℃.

Works

  • In case of making bolthole or wiring, keep a PLC from dust and dregs.

  • Install at the place for easy operation.

  • Do not install together with high-voltage device and same panel.

  • The distance between a duct and a module is to be over 50 mm.

  • Ground at the place where noise environment is good.

 

Cautions

  1. Do not drop or shock.

  2. Do not separate a PCB from a case. That may cause breakdown.

  3. In case of wiring, take care that dregs come into the top of a module. If there are, remove them.

  4. Mount or take out a module after turning off the power.