PLC Link in Exclusive Network

Owned by CIMON (Unlicensed)
Mar 25, 2024
1 min read

This service is to exchange high baud rate and large capacity data between CIMON PLCs. An Ethernet card is used.

PLC Link, a communication method between CIMON PLC communication modules, is used to exchange data and information with the other party at a certain time periodically. Sending/Receiving Data Size, Interval and Device in the Parameter of the CICON to exchange data can be set up. This is the PLC Link service to regard the network speed as important.

 

 

Features :

The total of 64 blocks, 32 Sending blocks and 32 Receiving blocks each, can be set up for each communication module.

 

Link Points

Max. Comm. Points

Max. Sending Points

Max. Block Points

Max. Points Per Block

4,096

2,048

64(0~63)

64

 

64-word data can be sent for each block.

 Users can use the CICON to set up a peculiar sending interval. The sending interval can be set up in the range from 50ms to 3sec.

Users can use the CICON to set up a specific device and data size for sending/receiving data.