Installing and Testing - Ethernet Module

Owned by CIMON (Unlicensed)
Mar 25, 2024
1 min read

  • Safety Precautions :
    The maximum Ethernet communication modules mounted on the PLC standard base are four (4).

  • Make sure the basic components necessary for the configuration of a system and mount suitable communication modules. Select the cable used for this communication module.

  • When you mount this communication module, make sure whether there is dust and remains in the base connector to mount and whether the connector pins of this module are broken.

  • Mount the modules in the state of the power-off.

  • When you mount this module, insert the connecting part on the bottom of the module to the slot of a base exactly in the state that the communication cable is not connected and press the power sufficient to lock the module to the base completely. Otherwise, an error in the interface with CPU may occur.

  • The cable used for this communication module is 10BASE-T cable.