Graphic Loader Service

Owned by CIMON (Unlicensed)
Mar 25, 2024
2 min read

Transport Layer: UDP/IP
Port: 10266

This function is to write a program, to download and upload users’ program, to debug and to monitor remotely without moving physical connection in Ethernet network system, using the CICON.
Especially, this is a convenient function to access each device easily at a place, in case that the devices connected to a network are scattered away.

 

Setting Up to link with the CICON

All the PLCs linked with the CICON network can access each other through the CICON communication service.

 

Setting up
Select the Environment Setup in the Tools of the CICON menu bar.

 

image-20240325-015659.png

 

But, the environment is to be set up in unlinked state.

 

As the above picture, click the Communication Setup. The following dialog box will appear.

 

image-20240325-015704.png

 

 

Enter the values in the dialog box.
Select Link Type: This is used to select link type with the CICON. Select Ethernet.
Comm. Setup: Enter the same as the IP address of the Ethernet module connected with the CICON. And Enter the TIMEOUT and the Retry.

Press the OK button.

 

 

Linking : The CICON runs to link.

 

 

Press the "OK" button.