TC Module Status

Owned by CIMON (Unlicensed)
Mar 26, 2024
1 min read

You can check firmware version of TC module and Error code if you click "Status"

 

image-20240326-054153.png

 

If you click "Scale Setup" after selecting channel, below windows appears

 

image-20240326-054155.png

 

If digital scale is not set, this module converts maximum and minimum temperature for each thermocouple into 0(-8000) ~16000(8000). If you want to change maximum and minimum temperatures, select scaling and set temperature when digital value is 0 and 1600. Scale set value is stored at EEPROM. Therefore, this module keeps previous value even if power is turned OFF/ON.