/
Trouble shooting - PLCS TC
Trouble shooting - PLCS TC
RUN LED is blinking every 0.2 second
Check error code in TC module status window from CICON
If there is short circuit (error code: 1) or temperature exceeds measurement temperature range (error code 4), error code is generated. Following picture indicates a case that No.1 channel is under short circuit.
Refer to Error code
RUN LED is blinking every 0.2 second and Error code No.2 is displayed.
TC module uses ±15V in analog calculation area. If voltage is not imposed on this module, this error occurs.
, multiple selections available,
Related content
Trouble shooting - PLCS RTD
Trouble shooting - PLCS RTD
More like this
Trouble Shooting - TC Module
Trouble Shooting - TC Module
More like this
Error code (Buffer memory address "31~38")
Error code (Buffer memory address "31~38")
More like this
Error Codes ("31-38") - TC Module
Error Codes ("31-38") - TC Module
More like this
TC(열전대) 모듈
TC(열전대) 모듈
More like this
Error Code - PLCS AD/DA
Error Code - PLCS AD/DA
More like this