Digital conversion value - PLCS AD/DA

Owned by CIMON (Unlicensed)
Mar 26, 2024
1 min read

It is used to save A/D conversion digital output value.

Data in other areas is displayed depending on resolution setting for AD/DA (Offset 28)

 

[16 bit Resolution]

Digital conversion value is expressed by 1 bit data of 0 ~ 64,000 (or -32,000 ~ 32,000) and of the value is off the range, it is fixed into -384 / 64,383 (or -32,384 / 32,383)

 

[14 bit Resolution]

Digital conversion value is displayed by 14bit data with 0 ~ 16,000 (or -8,000 ~ 8,000) and if the value is off the range, it is fixed into -192 / 16,191 (or -8,192 / 8,191)