alibration setting for A/D

Owned by CIMON (Unlicensed)
Mar 26, 2024
2 min read

Double click AD/DA 2/2Ch at workplace.

 

image-20240326-044416.png

 

Click "A/D Calibrate"
In case of voltage input, 0~20mA will be a base provided that current input is -10~10V. If input is fixed by a single value, its degree of precision becomes highest. Set resolution for 14bit and 16bit respectively and then click "A/D Calibrate".

 

image-20240326-044421.png

 

Select channel and click "Next"

 

 

Input -10V and 4mA if setting is -10 ~ 10V and 4 ~ 20mA. Click "Next"

 

 

Input maximum value for each setting input.

 

 

Complete this procedure by performing same methods mentioned above for each channel.