Application Program and Example

To use a Mux module, the desired channels should be enabled and the relay ON time should be set. There are two ways for configuring the module settings.

  • When configuring the settings on the RTD settings window of CICON (refer to page 6), there’s no need to use scan program as below. However, when the modules get swapped, the settings need to be reconfigured.

  • Module settings configuration can be done by using scan program as below.

Whichever method the user chooses, the settings get saved on the internal memory and it stays even when the power restarts.

 

image-20240326-065903.png

 

Row 0: channels 1,2,3,4 of SP04EAM module get enabled
Row 1: channels 1,2,3,4 Relay ON time get set to 1.5 seconds
Row 2: the settings save request (Y22) gets SET
Row 3: when the settings save completed flag (X22) is SET, the settings save request (Y22) resets
-> Settings Saved