Function - PLCS AD MUX

Owned by CIMON (Unlicensed)
Mar 26, 2024
1 min read

Channel Enable / Disable
The user can select enable or disable for each channel .
Channel conversion time can be reduced by disabling non-used channels.

Relay ON Time Settings
Possible to set-up different relay ON time for each channel.
Anywhere from 0.1 to 1000.0 sec range can be set.

Operation Status
Indicates currently used channel information.
Bit for disabled channels shows as 0.

Relay Count Values
Relay count values are shown for each channel.
By looking at relay count values, the user can check the life expectancy of the relay.
Relay count information can be reset.

Auto/Manual Mode
Auto/Manual mode set-up for flexible settings of channel conversion time.

Error Detection
Error detecting function to monitor any problems in the module.
The error code can be reset.