Local Setup

Item

Description

Primary IP Address

Enter the Primary IP Address of the UltimateAccess Web installed PC.

Secondary IP Address

Enter the Secondary IP Address of the UltimateAccess Web installed PC.

This option is enabled only when the ‘Line Redundancy’ option is selected. If the ‘Line Redundancy’ option is selected, the Secondary IP Address must be filled in.

[…]

When you press this button, [Network Adapter Information] window will appear. You can select an IP address easily.

Select the desired network adapter and press [OK]. If the ‘Use Dynamic IP’ option is deselected, the IP address will be assigned. If the ‘Use Dynamic IP’ option is selected, the MAC Address will be assigned.

Use Dynamic IP

Select this option to use domain name through DNS.

When you select this option and press  button, you can assign MAC Address to the ‘Primary IP Address’ or ‘Secondary IP Address’.

Port No.

You can assign a port number for TCP/IP communication between the Server and the Client, in range of 0 to 99. Unless the occurrence of the communication error, you are not required to change the default port number.

The port number must be same in the Server and Client.

Time-Out

When the communication is not connected in the assigned time, this feature considers that the connection is disabled.

If the disconnection time exceeds the value assigned to the Time-Out, the Client considers that the Server has an error. In case of the Server redundancy, the Client will try to connect to the Standby server. You can only assign from 1 to 59 seconds.