CIMON Net
- Jongeun Hur (Unlicensed)
CIMON NET Driver
CIMON-NET supports the communication between UltimateAccess Web.
Supported devices and requirements |
Β | Contents | Notes |
Distributor | CIMON Co., Ltd | Β |
Device | UltimateAccess Web | Β |
Comm. Module | - | Β |
Comm. Type | Ethernet/Serial | Β |
Protocol | CIMON-ENet/CNet Protocol | Β |
Description | CIMON Net (Ethernet) CIMON Net (RS232/MODEM) | Β |
Communication Settings |
Local
Β
Β | Description |
Line Redundancy | Select the checkbox if the line redundancy is used. |
#1 IP Address | Sets the local IP address. |
#2 IP Address | Sets the 2nd local IP address if the line redundancy is used. |
Time Out | Sets the timeout of the communication. If thereβs no data transferred for the set amount of time, it will be considered as communication error. If the line redundancy is used, the line will changed to the substitute one. |
Β
Linked Devices (CIMON Enet Server)
The user can set multiple UltimateAccess Web servers of different locations as an I/O device. UltimateAccess Web servers can be added, edited and deleted by using the corresponding buttons. Pressing [Add] or [Edit] will bring up the popup to configure the server.
Β
Β
Β | Description |
Name | Enter the name of the Enet server. |
Port | Enter the port number of the Enet server. |
#1 IP Address | Enter the primary IP address of the Enet server. |
#2 IP Address | Enter the secondary IP address of the Enet server in case of redundancy. |
Β