Output signal

Owned by CIMON (Unlicensed)
Mar 26, 2024
1 min read

 

Device

NO.

Name of signal

Description

Y02

Request to save set value

(1) This signal is turned ON when RTD conversion Enable/Disable, Designating RTD SET data and Maximum and Minimum temp. set value are stored.

(2) Refer to X02(Set value saving completion) for timing of ON/OFF

Y0E

Requesting circuit calibration

(1) This signal is turned ON when circuit calibration is requested.

(2) Refer to X02(Set value saving completion) for timing of ON/OFF

Y0F

Requesting error clear

(1) This signal is turned ON when error flag(X0F) is cleared.

(2) Refer to X0F(RTD module error flag) for timing of ON/OFF.