Shape Configuration
- CIMON (Unlicensed)
- CIMON (Unlicensed)
On the left side of the configuration window, you can setup the appearance and position of the switch/lamp object. You can choose the shape of the switch/lamp object and configure its size and position.
A Switch/Lamp object uses the first item of the part editor as a default image. If a part does not exist, the default image as shown below is used.
Item | Description |
Select Shape | You may decide a shape of the Switch/Lamp object. The first part object of the part editor is used as a default. |
No Shape | Hides the shape of the object. It is marked with dotted lines in the editor but the lines are not shown in the CimonX. |
Position Setting | Decides the position of the object. You can assign values from 0 to 32767. X/Y Position indicates the coordinate of the graphic page. When you manually setup the position, be cautious that the object does not exceed the page. |
Size Setting | Decides the size of the object. You can assign values from 0 to 32767. The size is based on the default size of the shape you have selected. When you manually setup the size, be cautious that the object does not exceed the page. |
(1)Β Β Β Select Shape
In the [Select Shape] window, first shape (State 0) becomes the default shape. If an image is not selected, the default image as shown below will appear. To change the shape, press [Open] button or double click the image.
(1)Β Β Β [Open]
Press [Open] or double click the image in the [Select Shape] window to change the shape. You can select the images of the part editor and the library
Item | Description |
Search | You can find an image from the list with the given number. Enter the desired imageβs number and press the [Search] button. The corresponding image will be selected. Then, press [Open] or double click the image to use it as Switch/Lamp object. |