15.3.1 Settings
An alarm summary object is configurable when you click [Draw] – [Alarm Summary] or  icon. The same command can be found in the [Toolbox]. You can enlarge the object’s size more than that of alarm summary toolbar.
After selecting [Alarm Summary] menu, click the blank area of a graphic page. The object configuration dialog box will appear as shown below.
Â
An alarm summary object is configurable when you click [Draw] – [Alarm Summary] or  icon. The same command can be found in the [Toolbox]. You can enlarge the object’s size more than that of alarm summary toolbar.
(1)Â Â Â Buttons
Item | Desctiption |
Check All | Selects entire items in the current tab. This command is enabled in [Alarm Level], [Alarm Zone], [Display Type], [Alarm Status] tab. |
Uncheck All | Deselects all selected items in the current tab. This command is enabled in [Alarm Level], [Alarm Zone], [Display Type], [Alarm Status] tab. |
<< Prev | Goes back to previous step. |
Next >> | Goes ahead to next step. |
OK | Create an alarm summary object with configurations. |
Cancel | Exits the dialog box without configuration. |
(2)Â Â Â Alarm Level
Assigns the alarm level at the digital or analog alarm to monitor on the alarm summary. Alarm level can be assigned up to 15 grades.
(3)Â Â Â Alarm Zone
Assigns the alarm zone at the digital or analog alarm to monitor on the alarm summary. Alarm zone can be assigned up to 16 locations.
※     Refer to the ‘Alarm Configuration’ manual for more information about alarm zone.
(4)Â Â Â Display Type
Selects the alarm type to monitor on the alarm summary.
※     Refer to the ‘Alarm’ manual for more information about alarm type.
Tag Type | Alarm Type | |
Digital Tag | OFF Alarm, ON Alarm, OFF → ON Alarm, ON → OFF Alarm, OFF ↔ ON Alarm | |
Analog Tag | Boundary Value | HiHi Alarm, Hi Alarm, Lo Alarm, LoLo Alarm |
Deviation Value | Main Dev Alarm, Sub Dev Alarm | |
Rate of Change | ROC Alarm |
(5)Â Â Â Alarm Status
Selects the alarm status to display on the alarm summary in CimonX runtime.
(6)Â Â Â Format
Configures the format of alarm message to display on the alarm summary.
Item | Description | |
Time Format | Specifies time format on the alarm summary. | |
Item List | Shows the following information on the alarm summary. | |
Time | The time stamp of the most recent change of status for the instance of the alarm. | |
Tag Name | The tag name corresponds to an alarm. | |
Tag Value | The tag values when corresponding alarm is enabled or disabled. An analogic alarm is represented as numeric value. A digital alarm is represented as status string. | |
Alarm Status | The alarmed state that determined on changes of limits and conditions. | |
Alarm Type | The type of alarm which is enabled during process. | |
Alarm Description | This indicates descriptions based on each state of alarm. | |
Alarm Off Time | The time stamp when the corresponding alarm is disabled. | |
Alarm Zone | The area where the alarm is enabled. (A~P) | |
Alarm Level | The grade of the enabled alarm. (1~15) | |
Alarm On Time | The time stamp when the corresponding alarm is enabled. | |
Alarm Time | The hours that the alarm status is kept. | |
Size | Sets the column width to hold the alarm messages. This value can be assigned from 1 to 99. | |
<<, >> | Add the item which you want to display in the alarm summary. | |
â–¼, â–² | Order in which you want the items to be sorted in the alarm summary. |
(7)Â Â Â Color
Configures each displayed alarm message up to 90 different colors; Alarm zone, alarm status, alarm type and alarm level. You can also set alarm summary object’s background color.
Â
Â
(8)Â Â Â Option
This section allows you to modify the appearance of the alarm summary object.
Item | Description |
Name | Designates the name of an alarm summary object. This name is used to set up the alarm summary object with a specific ID. For example, if you wish to print the Alarm Summary by using script, the window will be distinguished by object’s name in the script manager. |
Show Header | Shows the header in the upper side of window. |
Show Tool Button | Shows the tool buttons at the bottom side of window. The toolbar contains following items; Historical alarm, print, selected alarm ack, window alarm ack, all alarm ack, filter, save. |
Bottom Add | Adds a newly occurred alarm at the bottom of the window. |
New Item Add | While alarm for a tag continues to occur or to be released, the recent alarm status will be displayed and the contents for a previous alarm will disappear. |