Label

You can display a text on the object. The text may differ according to the tag’s state. User can enter the text manually or retrieve the contents from the comment table.

Item	Description
State	Select a state of the tag (OFF or ON) when the label is displayed. If you have configured multiple states on [Lamp Feature] tab, you can select a state in the range as shown below.
	Bit Lamp	Change State by Bit Combination	Max 16 states (0 ~ 15)
		Change State by Bit	Max 5 states (0 ~ 4)
	Word Lamp	Change State by Bit Combination	Max 256 states (0 ~ 255)
		Change State by Bit	Max 17 states (0 ~ 16)
		Change State by Data Range	Max 256 states (0 ~ 255)
String Type	Direct Input	The operator manually enters the text to be displayed on the object. You can enter up to 30,000 characters.
	Font Properties	Configure the manually entered text’s properties, such as font type, font size, alignment and the slant. The assigned font type may not support the language. Check the availability before use.
	Comment Table	Retrieve the string you have entered in the comment table. You can set Group, Comment No. and Column No. If you assign the tag, only analog tag can be registered.
Import	Load the label setting from the clipboard.
Export	Store the label setting to the clipboard.

When you paste the label settings to the excel, the contents are pasted as shown below.

A

B

C

D

E

F

State

Direct Input /

Comment table

(0, 1)

Direct Input text

Comment table

Group No.

Comment No.

Will be updated later