Set up for HSC
- CIMON (Unlicensed)
If you select the HSC in the above dialog box, the mounted slot and the OK, a HSC setup dialog box will appear and the values currently set up to a HSC card will be automatically uploaded.
Counting Setup
Counting Mode : This is used to select ring counting or linear counting.
Preset Value : This is used to set up a preset value.
Coincidence Comparison Value 1, 2 : This is used to set up Coincidence Comparison Value 1 & 2.
Min. ring-counted value : This is used to set up the minimum value when ring counting is used.
Max. ring-counted value : This is used to set up the maximum value when ring counting is used.
Counting Function Setup
Counting Type : Disabling to count, latch counting, sampling counting, periodic pulse counting
Sampling/Interval(ms) : This is used to set up the time and the interval of sampling when sampling counting or periodic pulse counting is used.
Pulse Input Setup
Pulse Input Type : 1-ph 1-multiple, 1-ph 2-multiple, CW/CCW, 2-ph 1-multiple, 2-ph 2-multiple, 2-ph 4-multiple