Reset CPU Error
It is used to reset CPU error.
(Only Remote mode supports this function.)
If error occurs, PLC Status shows Major Fault. (Click Online → PLC Status)
Or Online Status Bar displays error.
In order to reset error, CPU module must be Remote mode.
(Turn switch on CPU module as Stop mode → Remote mode)
Click Online and choose CPU Error Reset.
PLC Status changes to Normal.
Online Status Bar also display OK signal.
Notice
CPU Error Reset can be supported below firmware version.
Module | Firmware version |
CM1-XPxxx | 3.09 or higher |
CM1-CPxxx | 3.02 or higher |
CM1-EPxxx | 3.04 or higher |
CM3-SPxx | ALL |
CM3-SBxx | ALL |
CM2-BP32xx | 1.25 or higher |
CM2-BP16xx | 1.14 or higher |