Monitor a program

Monitor a program

To monitor a project that is executing in a PLC, CICON(computer) must be connected to PLC.

There are three way to operate program monitor.

1. Click Online and choose Connect.

2. Click Online and choose Link+Download+Monitor, Monitor runs automatically when downloading completes.

3. Click Online -> Program Monitor and choose Start Program Monitor

Open

If contact is ON, blue mark appears on the contact.

To change the device value, press Shift + double click the contact or press Shift + Enter.

Memory Monitor

To monitor device values, click Online and choose Memory Monitor

If you change the value at the ladder logic program, Memory Monitor shows the value.

Open