7.2.1 Comment Table Settings

Item

Description

Creates a new comment table. When you click icon, a dialog box will appear as shown below.

Open

Group Title

Enter the name of comment table. You cannot leave it empty.

Group No.

Assign a group number. The group number cannot be duplicated. You can assign from 0 to 999,999,999.

If the group number is too large, it might be hard to assign the group with a tag. In this case, change the data type of the tag.

Press  icon to save the changes in comment table. If you try to close the window without saving it, a pop up message will appear asking if you wish to save the changes.

Press  icon to delete the group (Comment Table).

Select a group and press  icon to save the comment table as CSV file. You can select the path.

Create a new group and press  icon to load CSV file.

There are 16 columns (0~15). When you press  icon, current group’s [Column Property] window will appear. Here, you can set font types and the control column tag.

Open

Please check if the font type supports the language you have used in the column.

Column 0 - 15

Set font type of each column. The font lists are based on the fonts installed in your PC.

Control Column Tag

Register a tag which will decide the column number. You can register an analog or a digital tag. You can either browse a tag by pressing  icon or enter the tag name manually.

When the tag value changes, the corresponding column number will be displayed.