/
18.1 I/O Device Setting

18.1 I/O Device Setting

Owned by CIMON (Unlicensed)
Last updated: Oct 12, 2023 by CIMON (Unlicensed)
1 min read

In UltimateAccess Web, I/O device means the devices connected with UltimateAccess Web. You can select an I/O device at [Tools] – [I/O Device]. If there is no desired I/O device, contact CIMON for the device’s driver inquiry. After selecting the I/O device, you can set communication parameters and real tag’s I/O Device and the address.

  • If you add more than 5 I/O devices in your project, there may be a communication load depending on the type of device. Be sure to check this before setting up and using them.

 

Related content

18. I/O Device Utilization
18. I/O Device Utilization
UltimateAccess Web 1.0
More like this
CIMON Net
CIMON Net
UltimateAccess Web 1.0
More like this
19.1.2 Network System Diagram
19.1.2 Network System Diagram
UltimateAccess Web 1.0
More like this
18.1.1 Settings
18.1.1 Settings
UltimateAccess Web 1.0
More like this
19.1 Settings
19.1 Settings
UltimateAccess Web 1.0
More like this
19. Network Utilization
19. Network Utilization
UltimateAccess Web 1.0
More like this