CIMON NET Driver

CIMON-NET supports the communication between UltimateAccess Web.

Supported devices and requirements

	Contents	Notes
Distributor	CIMON Co., Ltd
Device	UltimateAccess Web
Comm. Module	-
Comm. Type	Ethernet/Serial
Protocol	CIMON-ENet/CNet Protocol
Description	CIMON Net (Ethernet) CIMON Net (RS232/MODEM)

Communication Settings

Local

	Description
Line Redundancy	Select the checkbox if the line redundancy is used.
#1 IP Address	Sets the local IP address.
#2 IP Address	Sets the 2nd local IP address if the line redundancy is used.
Time Out	Sets the timeout of the communication. If there’s no data transferred for the set amount of time, it will be considered as communication error. If the line redundancy is used, the line will changed to the substitute one.

Linked Devices (CIMON Enet Server)

The user can set multiple UltimateAccess Web servers of different locations as an I/O device. UltimateAccess Web servers can be added, edited and deleted by using the corresponding buttons. Pressing [Add] or [Edit] will bring up the popup to configure the server.

	Description
Name	Enter the name of the Enet server.
Port	Enter the port number of the Enet server.
#1 IP Address	Enter the primary IP address of the Enet server.
#2 IP Address	Enter the secondary IP address of the Enet server in case of redundancy.