/
Wiring(CM1 RTD)
Wiring(CM1 RTD)
- 주익균(Ik Kyun Joo)
Owned by 주익균(Ik Kyun Joo)
Dec 12, 2024
1 min read
Analytics
Loading data...
Terminals are grouped as 1-2-3, 9-10-11, 13-14-15 and each above channel taskes input.
Channel | Terminal A | Terminal B | Terminal b | Terminal FG |
CH 1 | Terminal 1 | Terminal 2 | Terminal 3 | Terminal 18 |
CH 2 | Terminal 5 | Terminal 6 | Terminal 7 | Terminal 18 |
CH 3 | Terminal 9 | Terminal 10 | Terminal 11 | Terminal 18 |
CH 4 | Terminal 13 | Terminal 14 | Terminal 15 | Terminal 18 |
►Wiring Method
※ Contact both shields of RTD and wire to FG of RTD input module. The difference between wires must be 1Ω or less.
, multiple selections available,
Related content
Wiring - PLCS RTD
Wiring - PLCS RTD
More like this
Specification of RTD module
Specification of RTD module
More like this
Input Signals - RTD Module
Input Signals - RTD Module
More like this
Comparing Converted Values on an Expansion Base
Comparing Converted Values on an Expansion Base
More like this
Input Signal
Input Signal
More like this
Channel Setup
Channel Setup
More like this