/
Installation and Parameter setting(CM1 Positioning)

Installation and Parameter setting(CM1 Positioning)

Owned by 주익균(Ik Kyun Joo)
Last updated: Dec 12, 2024

  1. Connect EtherCAT cable between RJ-45(OUT) of PS08N and the RJ-45(IN) of Servo driver.

  2. Connect CICON to PS08N module.

  1. Before use servo driver, check power, wiring and servo driver parameter.

  1. Download parameter of PS08N Master setting to the PS08N module.

  1. You can monitor status of axis after parameter download. If axis error occurs, you can find out how to reset error when you double click the error code.

  2. Make a program by CICON.

Related content