/
Install CIMON USB Driver

Install CIMON USB Driver

Owned by CIMON (Unlicensed)
Mar 26, 2024
3 min read

Installation of USB Device Driver

Windows XP: USB device driver is installed automatically when you run CICON after CICON installation.

Windows 7: Install USB device driver as following steps :

  1. Turn PLC power on and connect PLC to PC with USB cable. Select [Control Panel] -> [Devices and Printers]

    image-20240326-024432.png

  2. There is CIMON PLC in [Unspecified].
    Click the right button of the mouse with cursor on the [CIMON PLC] and select [Properties]

    image-20240326-024455.png

  3. Select [Hardware] tap and click [Properties]

    image-20240326-024504.png

  4. Click [Change settings]

    image-20240326-024509.png

  5. Select [Driver] tap and click [Update Driver]

    image-20240326-024514.png

  6. Select [Browse my computer for driver software] at [Update Driver Software – CIMON PLC]

    image-20240326-024519.png

  7. Select [Usb_Driver] folder where CICON is installed and click [Next]

  • In case of Windows 7 64Bit, Select [Usb_Driver] -> [OS_64Bit] folder

    image-20240326-024526.png

  1. Select [Install this driver software anyway] at [Windows Security]

    image-20240326-024531.png

  2. The Driver Software is being installed.

    image-20240326-024536.png

  3. If USB Driver is installed successfully, [KDT PLC USB Loader CICON] appears.
    Click [Close] to finish installation.

    image-20240326-024543.png

  4. If USB Driver is installed successfully, [CIMON PLC USB Driver for CICON] appears under [Universal Serial Bus Controllers]

    image-20240326-024550.png

  5. CICON can connect PLC through USB cable.

    image-20240326-024556.png

Related content